Category Archives: Product

How To Use Iron On Patches

Not only are iron on patches fashionable, trendy and self-expressing, but they are also very useful. Say, your favorite shirt is slightly damaged or has an irremovable stain. Then you can use it by putting patches in the said area. Using patches are not just for creativity but also for its significance. It helps to showcase a better way to be thrift. Because the damaged part in the item is hidden, then you need not to dispose of it!

Most Common Uses Of Patches Are :

In the preparation of ironing a patch, you have to determine the kind of patch you have. Some patches have glue on their back while others have a dark clothing part on the back. For patches that have cloth backing, you can attach them through the use of a fusible web or iron on fusing tape. These can be easily purchased. These are also actually affordable and convenient. For patches designed to cover up torn clothes, they have paper backing that should be pulled off before the patch is applied.

Next, you need to examine the type of fabric you will use. If your patches are for clothing, then you should look at the label to confirm if it can be ironed. (If it has a crossed iron sign, then you need to figure out the fabric type.) Fabrics such as denim and cotton are usually compatible with patches, whereas silk is not due to being a delicate fabric. Remember that the fabric you will use should be as heavy as the patch. You need to be careful on polyester fabrics, knowing that heat is required in ironing on patches. These may cause the clothing to burn or discolor.

Patches

Placing the patch is the next step. Before you heat up the iron, when you’ve decided the placement of the patch, lay it down. For brand patches, you need to place it somewhere people will easily see it. But of course, for concealing a damaged or torn spot, it’s different. You just put the patch on that area.

Upon ironing the patch, first is you need to place the clothing or accessory on a heat resistant and flat surface such as an ironing board. If you don’t have any, you may improvise with the use of a sturdy table with a doubled bath towel or any thick fabric similar to it.

You need to iron the item first to make sure the item provides a flat surface for you patch. Thus, making it easier to iron on. This also ensures that the part of the fabric that is about to receive the patch will be flat against a hard or stable surface. This is necessary in making the patch appear well-placed when it is finally stuck on the fabric.

The next step is positioning the patch to your preference

The adhesive side or back side of the patch should be flat against the fabric that serves as the base.

Now you need to heat up your iron to the highest level because the process of putting your patch requires concentrated heat. Make sure the iron is not full of water and that the “steam” function is switched off.

Iron On Patches
Now, put a thin towel over your newly ironed patch. This will serve as a shield that will protect that patch. You need to be careful not to disturb the placement of your patch.

As you position your iron over the patch, you need to press it down and apply necessary pressure. Hold the iron in that position for at least fifteen seconds.

After that, you may remove the iron and then give the patch time to cool. Lift the towel you placed earlier and check if it is secured on the fabric. You may do so by gently lifting the patch. If it lifts up a bit, you need to repeat ironing for approximately ten more seconds.

Caring for your patches to make sure it stays put would mean you may consider sewing its edges. When it comes to washing, you need to make sure you don’t wash it more than necessary. Also, use cold water. Though patches are made to be permanent, it may loosen in time.

 

Author Bio:
Visit patches4less.com for more variety and quality patches, iron on patches and embroidered patches. Here you get a satisfactory designs and style as per your need.